[Shotimes] lifting an engine

[Zach Leahy]

All this talk of pulling a motor makes me want to go take mine out...
for no good reason... again.

Z

On 8/10/05, Devin Fisher <dmf@meumonus.com> wrote:
> I used the intake support bolts as well. My hoist came with a load balancer
> but you could probably just use a couple chains easier.
> 
> -Devin
> 
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of George Fourchy
> Sent: Tuesday, August 09, 2005 9:32 PM
> To: shotimes@autox.team.net
> Subject: RE: [Shotimes] lifting an engine
> 
> On Wed, 10 Aug 2005 00:26:02 -0400, Bruce Malachuk wrote:
> 
> >without nary a bent intake bolt.
> 
> Sure...I've lifted 289 and 302 engines with their factory bolts hundreds of
> times....no problems.  Bolts are snugged against the lifting hardware...not
> sticking
> out.
> 
> George
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes