[Shotimes] water pump O ring kit

[clubairth@bellsouth.net]

Don:
 What I wanted was the standard o-ring size like a #45 or something. I want 
to get them from an industrial supplier in the future. Sho Nut just has the 
part numbers unless I missed it?
.
.

> Well ... according to Josh T's web page ... they did .. maybe they havent 
> ... i will check with my parts dept to see and let u know
>

>>Don:
>>I have a little different numbers.
>>E9DZ-8563-A   Fat O-ring that goes on water tube.   Size 3.5mm  X 40.2 mm 
>>ID
>>E9DZ-8513-B  Skinny O-ring goes on pump to block.  Size 1.9mm  X 35.2 mm 
>>ID
>>
>>If anyone can give me a standard o-ring size for these dimensions it would 
>>be a big help!!!!
>>I did not know these went obsolete!
>>.
>>.
>>
>>
>>>My understanding this part is obsolete through ford.
>>>
>>>FO E9DZ-8563-A
>>>Gasket(water supply tube)
>>>
>>>Isnt this the pack that has two O rings . The thin small one that goes
>>>to the back of the block and the thicker O ring that attaches to the
>>>pipe that feeds the T stat.
>>>
>>>Just want to make sure i have the right part number before i get these