[Shotimes] Need Help Evaluating Crankshaft Pully and Timing

[Dave Ulring]

Hey,

I have been spending an hour here an there over the
last two months tearing down my 93 MTX that I thought
had crank cancer.  Can I get a couple opinions on the
status of the pulley given these pics?  I also noticed
that the dots on the CAMS are not lined up after I
took the timing belt off.  I had the belt on when I
cranked the engine to loosen the crankshaft pulley
bolt.  After releasing the tensioner and pulling the
belt off I am not sure how it turned given I can not
turn it by hand very easily.  Does this matter as long
as I get everything lined up when putting the belt
back on?  I was also going to replace the crankshaft
seal, but it was replace a couple years ago and still
looks pretty good in my opinion.

http://24.210.131.12/sho/1.jpg
http://24.210.131.12/sho/2.jpg
http://24.210.131.12/sho/3.jpg
http://24.210.131.12/sho/4.jpg
http://24.210.131.12/sho/5.jpg
http://24.210.131.12/sho/6.jpg

Thanks in advance,

Hoping my problem was the CPS which I am also
replacing.

Dave
93 MTX
108k


		
__________________________________ 
Do you Yahoo!? 
Take Yahoo! Mail with you! Get it on your mobile phone. 
http://mobile.yahoo.com/maildemo