[Shotimes] oil cooler

[SHOZ123]

Yes, ran it through the added water cooler, into the OEM oil cooler
then back to the t-stat area.

Paul


On Wed, 23 Feb 2005 10:14:25 -0500, Zach Leahy <leahyz@gmail.com> wrote:
> So you guys cooled the water coming into the cooler, is that what i am hearing?
> 
> Summit P/N BMM-70261.  Comes with cooler, filter adapters (for various
> filters sizes), remote filter base, lines, barb fittings, and even a
> tiny little filter.  About the same size as the one on my motorcycle!
> I plan on using the FL-1A with this setup.  It should be the right
> base, but then again, I haven't screwed on on to see yet.
> 
> 
> Z
> 
> 
> On Wed, 23 Feb 2005 09:05:54 -0600, SHOZ123 <paul.nimz@gmail.com> wrote:
> > I had a large Hayden oil cooler plumbed into the coolant lines on the
> > oil cooler.  I do know it effectively helped keep the coolant temp
> > down.  I can only surmise it also helped the oil temps down too.
> >
> > Paul
> >
> >
> > On Wed, 23 Feb 2005 05:34:14 -0800 (PST), Ian Fisher
> > <dataflash@yahoo.com> wrote:
> > > I wonder how effective a second PS cooler mounted in
> > > the a similar position would work if it was plumbed to
> > > fit the in/out barbs on the oil cooler. It would
> > > probably run a lot cooler, thus cooling the oil a bit
> > > more. Maybe too much though..
> > >
> > > What's the part number of the kit you bought?
> > >
> > > Ian
> > >
> > >
> > > --- Zach Leahy <leahyz@gmail.com> wrote:
> > >
> > > > Hey folks,
> > > >
> > > > I have always hated the location of the oil filter,
> > > > and the inadequacy
> > > > of the oil/water cooler.  I usually see oil teps
> > > > around 220-250
> > > > degrees on a hot day.  Especially in slow traffic.
> > > > the oil temp will
> > > > soar well above the water temp and I often wondered
> > > > about the
> > > > effectivnedd of the oil/water cooler.
> > > >
> > > > Well, I fixed that problem and picked up a B&M
> > > > remote filter and
> > > > cooler.  I have not gotten to installing it yet, but
> > > > I will sometime
> > > > soon and I will post some pictures.  I was more in
> > > > for the remote
> > > > filter so i selected a rather small cooler designed
> > > > for 4cyl imports.
> > > > The flow rating is really good still as it is a bar
> > > > and plate setup.
> > > > Best part is the kit is like 110 bucks from summit
> > > > or Jegs.
> > > >
> > > > anyone interested in the P/N.
> > > >
> > > > Later all
> > > >
> > > > Z
> > > > _______________________________________________
> > > > Shotimes mailing list
> > > > Shotimes@autox.team.net
> > > > http://www.team.net/mailman/listinfo/shotimes
> > > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail - You care about security. So do we.
> > > http://promotions.yahoo.com/new_mail
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes