[Shotimes] sway bar inserts?

[Robert Bruce]

You didn't mention specifically whether you are talking about the front or
rear bar.  From how you describe the condition I assume the rear bar.  So,
yes there should be a bushing on each side of the bar and also on each side
of the upper mount on the struts.  Here are the Moog part numbers for both
front & rear.

front swaybar link: Moog  #K8702 includes grease fitting & 17mm hex (order
2)
rear swaybar link: Moog  #K8805 TPR (order 2)


Robert Bruce
92 w/3.2


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of
Cjhomelawncare@aol.com
Sent: Saturday, February 19, 2005 9:47 PM
To: shotimes@autox.team.net
Subject: [Shotimes] sway bar inserts?


I have a 89 Sho thats completely stock. After inspecting the sway bar  end
links, I noted that the end going into the sway bar was loose. It causes a
banging noise on rough roads.The end links were replaced less than 2 years
ago
and I really don't remember if it had a bushing or insert at that time. My
local
 ford dealer showed nothing on their drawings . Is there supposed to be a
bushing  or insert in the sway bar and is there one thats available  ?
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes