[Shotimes] Gen 1 rear brakes

[Ian Fisher]

I'm not sure about the hoses but gen1/2 should be the
same. Based on what Ken Epperly just posted, here's a
rundown:

89 vented rotors (unique to 89), caliper bracket
unique to 89. I'm not sure about the caliper itself

90-92 vented rotors, different offset than 89 so rotor
and caliper brackets are different. Caliper may be the
same as the 89 but I don't know

93-(99?) solid rear rotors, new caliper/bracket design

So yeah, if you get anything from 90-92 you should be
good to go. 

I actually have Ken's old 1990 spindles, calipers,
rotors, etc on my 93 now. I have the 11.6" brackets
but I probably won't use them. I'm happy with the
vented 10.x rear rotors.

I hope this helped more than it confused. 

Ian 


--- Paul Nimz <pnimz@v8sho.com> wrote:

> Your free subscription is supported by today's
> sponsor:
>
-------------------------------------------------------------------
> Hersheys. or Ghirardelli. Chocolate?
> Take our Nationwide Chocolate Survey today!
> Receive a FREE* $100 restaurant gift card of your
> choice or $100 
> worth Hersheys. or Ghirardelli. Chocolate for
> participating! 
>
http://click.topica.com/caadKa5b1dhxAb62fTTa/Chocolate
> Survey
>
-------------------------------------------------------------------
> 
> Thanks, it appears they are the same looking at Rock
> Autos parts.
> 
> Also the Gen 1 & 2 rear hoses are the same but the
> Gen 3 is different.  As the rear calipers are the
> same for the Gen 2 & 3 that means the other end must
> be different or the mounting bracket is different. 
> I'm not concerned about he mounting bracket.  I will
> take it off anyway.
> 
> Paul
> 
> 
> On 7/22/2005 8:27:17 PM, Ian Fisher
> (dataflash@yahoo.com) wrote:
> > I'm not sure if they are the same but you should
> be
> > fine if you get 90-92 brackets. They are def. the
> > same.
> > 
> > Ian
> > 
> > 
> > --- Paul Nimz <pnimz@v8sho.com> wrote:
> > 
> > > I would like to go up to the 11.6 brakes in the
> rear
> > > on my '97.
> > As I
> > > understand it I need to use the rear calipers
> and
> > > bracket from a GEN 1 with
> > >
> > Josh's adaptor kit and 11.6" rotors.
> > >
> > > When I look at the AZ parts catalog it shows no
> > > brackets for the '89
> > but does
> > > show brackets for the '92.  Are the 89 and '92
> > > brackets the same?  Part number
> > > is  Dorman 619-101  and 619-102.
> > >
> > > Paul
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > >
> > 
> > 
> > 
> > 
> >
> ____________________________________________________
> > Start your day with Yahoo! - make it your home
> page
> > http://www.yahoo.com/r/hs
> 
> Your free subscription is supported by today's
> sponsor:
>
-------------------------------------------------------------------
> Get a Free Sirius Satellite Package, don't pass on
> this!
>
http://click.topica.com/caadHlCb1dhxAb62fTTf/ProductTestPanel
>
-------------------------------------------------------------------
> 
>
--^----------------------------------------------------------------
> This email was sent to: dataflash@yahoo.com
> 
> EASY UNSUBSCRIBE click here:
> http://topica.com/u/?b1dhxA.b62fTT.ZGF0YWZs
> Or send an email to: TechSHO-unsubscribe@topica.com
> 
> For Topica's complete suite of email marketing
> solutions visit:
> http://www.topica.com/?p=TEXFOOTER
>
--^----------------------------------------------------------------
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com