[Shotimes] P/S Pump bearing

[Ron Porter]

They figured they would all be in the boneyard before anything needed to be
replaced!!!!

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of kerbyh@netzero.net
Sent: Tuesday, July 26, 2005 4:34 PM
To: shoguy_89@cox.net
Cc: shotimes@autox.team.net
Subject: Re: [Shotimes] P/S Pump bearing

Man this car has some weird ass parts in it.  A/C compressors used only in
it and a 7-series BMW, NZ Unicycle bearings, etc.  What engineer spec'ed
this crap?  Bozo T. Claun?

Kerby

-- Rich Bruso <shoguy_89@cox.net> wrote:
   Curious.  I have a few P/S pumps laying around, along with one that may
have a front seal seeping, so the recent post about rebuilding was very
interesting.  So, I decided to look around online for the parts.  I couldn't
find it with the ADI prefix on it, but the basic part 6203-2RS is apparently
the most common size for wheel bearings on New Zealand built unicycles.  The
only question is which is more obscure: The SHO or a NZ unicycle?
   Anyway, one page has the bearings listed at $14.95 for 10 of them:
http://tinyurl.com/ct4j2
   No idea what the ADI prefix means, but the size appears to be correct and
the speed and load ratings look to be more than enough.


-Rich Bruso
89 Black (Lola)
89 Silver (parts)
Sierra Vista, AZ
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes