[Shotimes] Cams and Crowbars and Cranks, oh my!

[Dave Pillsbury]

I've got dozens of 2575. Strange thing about running the shim spectrum. 
I've seen from 2300 to 2600 in one engine. To a straight up 2500X24 
shims in the last customer car we did. I thought that one was strange as 
hell. Until I cracked the engine on my 95 and took a look at the shims. 
2475to2525 is the shim spread on it. but the 89 engine here was 
2375-2600 and the 2300-2600 engine was my 90 the 94 ATX that I robbed 
the shims out of had very little spread too. It's either a simple fact 
of quality got better and there was less valve shim difference or the 
early engines were built better. By the way the last 94-95's I've done 
were all way out of spec!
Dave

Rich Bruso wrote:

>   Well, it looks like Lola's previous owner's mechanic did me another favor.  I got the car in '01, and in '02 (on my wedding day, no less) my clutch went out.  Upon inspection, it turns out the mechanic kept tracking down 9 1/4" clutches, so I got to spring for the larger bolt circle flywheel then.  Fun.
>   Anyway, the same guy apparently used some sort of percussive maintenance tool to reinstall the pulley.  I've managed to strip one puller bolt and bend two.  Fun.  It appears the key is still intact, and I know the timing belt pulley hasn't slipped at all (good news there)  I'm just wondering if anyone has any experience with trying to pull a munged up pulley off without collateral damage.
>   Also, after meticulous moving, checking, and rechecking, I've come down to some wonderful valve lash numbers on all but one each of the #2 and #3 exhaust valves, both of which really need a 2575.  2600 is too tight, and I'm out of 2550's.  Let me know if you have any spares you'd be willing to get rid of.
>   Strange note.  My spare motor (out of my old Titanium '89) had both a 2650 AND a 2375.  Quite a range of shims in that motor.
>
>
>-Rich Bruso
>89 Black (Lola)
>89 Silver (parts)
>Sierra Vista, AZ
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes