[Shotimes] wrench size for head bolts?

[Co-Op]

Head to block?  Use a 10mm allen wrench.  The easy way is to buy one with a
long reach and cut the short leg off.  Stick the long piece into a 6 point
socket and use a breaker bar to remove.  I'm pretty sure this is how it's
done.

-----Original Message-----
From: van Oss [mailto:vanOss@centurytel.net]
Sent: Monday, June 06, 2005 2:49 PM
To: shotimes@autox.team.net
Subject: [Shotimes] wrench size for head bolts?


What size allen wrench do I need to buy to R&R the head bolts?   Thanks.

VO
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes