[Shotimes] IAB/ Idle set procedure

[James F. Ryan III]

>From memory:

Disconnect the battery.  Then, depress the deccelaratrix (brake) pedal to
"empty" any idle strategies stored in the EEC memory.  (or maybe those two
should be reversed - brake pedal, then disconnect the battery)

Reconnect the battery.  Start the engine.  Do not touch the velocirator
(gas) pedal.  Turn on the headlights, A/C, boomin' strereo (if you have
one), and turn the steering wheel a few turns each way.  This allows the EEC
to adjust the idle with all of the accessory loads present.


----- Original Message ----- 
From: "Harry Seaman" <hjseaman@earthlink.net>
To: <stevetatro@gmail.com>
Cc: <shotimes@autox.team.net>
Sent: Tuesday, June 21, 2005 11:50 AM
Subject: [Shotimes] IAB/ Idle set procedure


> What is the idle set procedure to which you referred? I am about to
re-install
> my intake manifold, and I'll either put back the old IAB after cleaning it
or
> get a new one.
>
> Do you know anything about a TSB that recommends using the IAB from a '96
SHO
> to replace the one on my '95?
>
> Harry
> 95m
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes