[Shotimes] Transmission Shield

[Bill Murray]

Is that the sheild that goes above the trans for the wires or the one between the oil pan and bell housing?  I can't really see the one at the top getting beat up, its a fairly heavy gauge steel.

Bill
-----Original Message-----
From: "Kevin & Cheryl Airth" <clubairth@peoplepc.com>
Date: 06/28/05 12:16 PM
To: "Bill Murray" <fordsho@cloud9grafx.com>,"SHOTimes" <shotimes@autox.team.net>
Subject: Re: [Shotimes] Transmission Shield

Bill:
 I don't have a used one and most of them are torn up by now. The part
#E80Y3F540-A. For the MTX . List about $15.
For the ATX it's #F3DZ-3F540-A .List about $12.
..
..


> I'm looking to purchase the shield that goes on top of the trans and
> protects the wire harnesses and vac hoses from the clutch cable arm.  My
> car did not come with one and I am looking to replace it.  I'm trying to
> diagnose a clutch problem that I've been having to varying degrees since
> I've owned the car.  When having a helper push the clutch, I can see the
> harnesses, etc. moving around, and I'd like to prevent this. zipties
> only help so much.  Anyone have one they don't need?
>
> Bill Murray