[Shotimes] Transmission Shield

[Dave Kegel]

Right.  I was thinking that too.  FWIW, I could also use one of these.

Dave

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Bill Murray
Sent: Tuesday, June 28, 2005 11:58 AM
To: shotimes
Subject: RE: Re: [Shotimes] Transmission Shield


Is that the sheild that goes above the trans for the wires or the one
between the oil pan and bell housing?  I can't really see the one at the top
getting beat up, its a fairly heavy gauge steel.

Bill
-----Original Message-----
From: "Kevin & Cheryl Airth" <clubairth@peoplepc.com>
Date: 06/28/05 12:16 PM
To: "Bill Murray" <fordsho@cloud9grafx.com>,"SHOTimes"
<shotimes@autox.team.net>
Subject: Re: [Shotimes] Transmission Shield

Bill:
 I don't have a used one and most of them are torn up by now. The part
#E80Y3F540-A. For the MTX . List about $15. For the ATX it's #F3DZ-3F540-A
.List about $12. .. ..


> I'm looking to purchase the shield that goes on top of the trans and 
> protects the wire harnesses and vac hoses from the clutch cable arm.  
> My car did not come with one and I am looking to replace it.  I'm 
> trying to diagnose a clutch problem that I've been having to varying 
> degrees since I've owned the car.  When having a helper push the 
> clutch, I can see the harnesses, etc. moving around, and I'd like to 
> prevent this. zipties only help so much.  Anyone have one they don't 
> need?
>
> Bill Murray
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes