[Shotimes] Transmission Shield

[Kevin & Cheryl Airth]

It's a heavy Aluminum foil type material. Protects the P/S rack from heat.
Kind of wraps around things and is tie wrapped on from the factory. Not a
solid piece.
.
.



> Is that the shield that goes above the trans for the wires or the one
between the oil pan and bell housing?  I can't really see the one at the top
getting beat up, its a fairly heavy gauge steel.
>
> Bill
> Bill:
>  I don't have a used one and most of them are torn up by now. The part
> #E80Y3F540-A. For the MTX . List about $15.
> For the ATX it's #F3DZ-3F540-A .List about $12.
> ..
> ..
>
>
> > I'm looking to purchase the shield that goes on top of the trans and
> > protects the wire harnesses and vac hoses from the clutch cable arm.  My
> > car did not come with one and I am looking to replace it.  I'm trying to
> > diagnose a clutch problem that I've been having to varying degrees since
> > I've owned the car.  When having a helper push the clutch, I can see the
> > harnesses, etc. moving around, and I'd like to prevent this. zipties
> > only help so much.  Anyone have one they don't need?
> >
> > Bill Murray