[Shotimes] Transmission Shield

[Bill Murray]

I understand what you're talking about now.  What I am looking for is a black steel plate that bolts over the transmission, and is held on by 2 bolts above the fill plug on the MTX. It prevents the harnesses and hoses from getting pinched by the clutch cable arm.

Bill
My insulation for the rack could stand to be replaced though.
-----Original Message-----
From: "Kevin & Cheryl Airth" <clubairth@peoplepc.com>
Date: 06/28/05 01:15 PM
To: "Bill Murray" <fordsho@cloud9grafx.com>,"shotimes"<shotimes@autox.team.net>
Subject: Re: Re: [Shotimes] Transmission Shield

It's a heavy Aluminum foil type material. Protects the P/S rack from heat.
Kind of wraps around things and is tie wrapped on from the factory. Not a
solid piece.
..
..



> Is that the shield that goes above the trans for the wires or the one
between the oil pan and bell housing?  I can't really see the one at the top
getting beat up, its a fairly heavy gauge steel.
>
> Bill
> Bill:
>  I don't have a used one and most of them are torn up by now. The part
> #E80Y3F540-A. For the MTX . List about $15.
> For the ATX it's #F3DZ-3F540-A .List about $12.
> ..
> ..
>
>
> > I'm looking to purchase the shield that goes on top of the trans and
> > protects the wire harnesses and vac hoses from the clutch cable arm.  My
> > car did not come with one and I am looking to replace it.  I'm trying to
> > diagnose a clutch problem that I've been having to varying degrees since
> > I've owned the car.  When having a helper push the clutch, I can see the
> > harnesses, etc. moving around, and I'd like to prevent this. zipties
> > only help so much.  Anyone have one they don't need?
> >
> > Bill Murray
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes