[Shotimes] silencer cone
Rick Glass
cmysho@comcast.net
Sun, 6 Mar 2005 06:43:40 -0600
I forgot to mention, there were no ill effects to the filter, didn't seem to
need changed or cleaned any more often. I ran mine cut open this way for
about 80k.
If no one here has done this, your missing out.
Rick Glass
'99 SF 66k
Flowmasters
Kirk'd
>I don't have any pics (well, I can't find them) of my '94 and the '93 I
>used to have......I used a grinder (carefully) and cut the entire bottom
>and fender side of the box bottom out and the sheet metal. This left the
>intake area exposed over the wheel well, but did not open it up to the heat
>of the engine bay, without pulling the box cover and panel filter, you
>really couldn't see it. But it sounded incredible.
>
>
> Rick Glass
> '99 SF 66k
> Flowmasters
> Kirk'd
>
>
> ----- Original Message -----
> From: "Brett Lykins" <silversaxman2005@hotmail.com>
> To: <shotimes@autox.team.net>
> Sent: Saturday, March 05, 2005 2:20 PM
> Subject: [Shotimes] silencer cone
>
>
>>I was reading through the SHOtimes mods the other day and i saw one about
>>removing the silencer cone. Since my '93 is still stock, i was looking for
>>something that would make it a little more agressive (as if it werent
>>enough already), and to make it a little louder. The only thing i could
>>gather that would be a downfall to removing the cone would be that i would
>>have to clean out my filter every couple of weeks.
>>
>> Is that really the only downfall to doing this? are there any other risks
>> to damaging the motor in doing this?
>>
>>
>>
>> Brett Lykins
>> Maysville, Kentucky
>> 1993 SHO
>> Emerald Green
>> ATX
>> 1994 Porsche 968
>> Black
>> ATX
>> _______________________________________________
>> Shotimes mailing list
>> Shotimes@autox.team.net
>> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes