[Shotimes] Question About Swapping Cams

[Frank "SHOrage" Costa]

If i were to swap the cams right now from the still intact 3.0 head to the
dismantled 3.2 head.....

Can i just...

Unbolt the cam caps, move shims over to the new head in proper sequence...and
then just place the cam over the shims and then cap em?

And if i can, how do i know which way to have the cams facing as in timing...

For some reason i am happy this motor is not interference but i have to make
sure with everyone on the list....

Then when all is said and done Adjust the valves...

Bottom line is,  i got parts in the shed but not valve adjustment
tools....which means i cant remove the shims from the old head before removing
the cam and vice versa....

For now, i wanna get as much done as i can.....


Frank Costa and the "Silver Bullet" soon to be a 3.2

MODS-
SHOrt shifter
89 Titanium Grey
Dynomax Catback With Super Turbo Mufflers
Monroe Sensatrack Struts
Moog Cargo Coils All Around
Updated Front Swaybar Endlinks
Polyurethane Rear Swaybar Endlinks
Solid Delrin Subframe Bushings
Directional Italian SLicers
Bridgestone HP50 Tires All Around
Subframe Connectors

http://www.brothersofmetal.org/frank.html
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.1 - Release Date: 3/9/2005