[Shotimes] Intermediate Axle Type Thingamabob

[Leigh Smith]

Frank;
I would suspect CV joint first, wheel bearing 2nd, then the half-shaft
bearing 3rd. Just based on normal frequency of failure.
Lee
----- Original Message ----- 
From: "Frank "SHOrage" Costa" <SHOrage@brothersofmetal.org>
To: "1 SHOTIMES" <shotimes@autox.team.net>
Sent: Sunday, May 08, 2005 6:51 PM
Subject: [Shotimes] Intermediate Axle Type Thingamabob


> The passenger side axle hooks into this intermediate type axle. I have
reason
> to beleive that this bearing in there....has failed on me.
>
> I get this vibration that seems to be contingent with the rolling
assembly. Is
> this peace replacable? DO they fail?
>
> It just seems to be getting worse and worse.
>
>
>
> Frank Costa and the "Silver Bullet" soon to be a 3.2
>
> MODS-
> SHOrt shifter
> 89 Titanium Grey
> Dynomax Catback With Super Turbo Mufflers
> Monroe Sensatrack Struts
> Moog Cargo Coils All Around
> Updated Front Swaybar Endlinks
> Polyurethane Rear Swaybar Endlinks
> Solid Delrin Subframe Bushings
> Directional Italian SLicers
> Bridgestone HP50 Tires All Around
> Subframe Connectors
>
> http://www.brothersofmetal.org/frank.html
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 5/6/2005
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes