[Shotimes] Wheel bearing replacement.

[Paul L Fisher]

It's kind of like a really powerful amplifier. If a normal person listens to
it with the volume control set at 25%, the music I usually cleaner (less
distortion) than a smaller amplifier which needs to have its volume control
set at 90% for the same decibel level.


Paul L Fisher

Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
Amsoil dealer: http://www.paul-fisher.com/oil


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of George Fourchy
Sent: Thursday, May 12, 2005 3:11 PM
To: shotimes@autox.team.net
Subject: RE: [Shotimes] Wheel bearing replacement.

On Thu, 12 May 2005 15:07:30 -0500, Paul L Fisher wrote:

>Bigger is better with a press. It doesn't use all the 'tonnage' unless it
>needs it.

Correct...the more total capacity, the more finesse can be applied to a
smaller job.
 As soon as the bearing starts to move into its spot, the pressure applied
to it
goes down, remaining as small as possible.

George
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes