[Shotimes] It runs!

[Zach Leahy]

Yes, but the computer will sense the RPMs are too high and close the
IAB down even farther, thus negating the idle screw.

Z

On 5/15/05, bjshov8 <bjshov8@comcast.net> wrote:
> There's an adjustment screw that you can crank on the throttle body in order
> to raise the idle.  This is not the correct way to set idle and somewhat
> bypasses the IAB but it might help you to determine what idle speed you
> need, then you could get that put into your new programming from the
> beginning.
> 
> > I'm looking to raise the idle with the hopes
> > of getting the car to idle a little smoother.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes