[Shotimes] It runs!

Kevin & Cheryl Airth clubairth@peoplepc.com
Mon, 16 May 2005 14:34:07 -0500


The IAB can only close completely, so after it's closed all the way then the
adjustment screw will raise the idle. Actually the directions from Ford have
you unplug the IAB BEFORE adjusting the set screw.
.
.



> Yes, but the computer will sense the RPMs are too high and close the
> IAB down even farther, thus negating the idle screw.
>
> Z

> > There's an adjustment screw that you can crank on the throttle body in
order
> > to raise the idle.  This is not the correct way to set idle and somewhat
> > bypasses the IAB but it might help you to determine what idle speed you
> > need, then you could get that put into your new programming from the
> > beginning.
> >
> > > I'm looking to raise the idle with the hopes
> > > of getting the car to idle a little smoother.