[Shotimes] 3.2 swap problems

[Mark Nunnally]

Going back a way from memory (been a few years since I converted one) but I don't think there is a difference.  Is the sensor mounted correctly/snugly?

mark

-----Original Message-----
From: Jason Kennedy <jason8225@yahoo.com>
Sent: Oct 12, 2005 11:56 AM
To: shotimes@autox.team.net
Subject: [Shotimes] 3.2 swap problems

My 3.0L crank position sensor ring will not clear the
crank position sensor when rotating. So apparently I
need a 3.2L crank timing gear with the correct sensor
ring attached. I was not aware that there was a
difference with these between the 3.0 and 3.2L
engines.  Unfortunately, I only have the gears from my
3.0L as I basically only bought a 3.2 block with
nothing attached.  If anybody has an extra 3.2 crank
timing gear laying around with an undamaged sensor
ring they'd sell me, I could really use it.  Please
let me know.

Thanks!
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes