[Shotimes] 3.2 swap problems

[Jason Kennedy]

The way it is lined up right now the sensor fits
between the slots in the ring, but I can't move the
sensor back any farther to get the ring to clear it. 
I'll get a picture of it tonight and send it to the
list and see if anybody has any pointers.

Thanks

--- Mark Nunnally <marknunnally@joimail.com> wrote:

> Going back a way from memory (been a few years since
> I converted one) but I don't think there is a
> difference.  Is the sensor mounted correctly/snugly?
> 
> mark
> 
> -----Original Message-----
> From: Jason Kennedy <jason8225@yahoo.com>
> Sent: Oct 12, 2005 11:56 AM
> To: shotimes@autox.team.net
> Subject: [Shotimes] 3.2 swap problems
> 
> My 3.0L crank position sensor ring will not clear
> the
> crank position sensor when rotating. So apparently I
> need a 3.2L crank timing gear with the correct
> sensor
> ring attached. I was not aware that there was a
> difference with these between the 3.0 and 3.2L
> engines.  Unfortunately, I only have the gears from
> my
> 3.0L as I basically only bought a 3.2 block with
> nothing attached.  If anybody has an extra 3.2 crank
> timing gear laying around with an undamaged sensor
> ring they'd sell me, I could really use it.  Please
> let me know.
> 
> Thanks!
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes