[Shotimes] 3.2 swap problems

[Ian Fisher]

Perhaps your ring is bent. I don't believe there is a
difference. I have a bunch of sensor vanes and IIRC
they are all the same. I could drop one off in the
mail if you need it though.

Ian
--- Jason Kennedy <jason8225@yahoo.com> wrote:

> The way it is lined up right now the sensor fits
> between the slots in the ring, but I can't move the
> sensor back any farther to get the ring to clear it.
> 
> I'll get a picture of it tonight and send it to the
> list and see if anybody has any pointers.
> 
> Thanks
> 
> --- Mark Nunnally <marknunnally@joimail.com> wrote:
> 
> > Going back a way from memory (been a few years
> since
> > I converted one) but I don't think there is a
> > difference.  Is the sensor mounted
> correctly/snugly?
> > 
> > mark
> > 
> > -----Original Message-----
> > From: Jason Kennedy <jason8225@yahoo.com>
> > Sent: Oct 12, 2005 11:56 AM
> > To: shotimes@autox.team.net
> > Subject: [Shotimes] 3.2 swap problems
> > 
> > My 3.0L crank position sensor ring will not clear
> > the
> > crank position sensor when rotating. So apparently
> I
> > need a 3.2L crank timing gear with the correct
> > sensor
> > ring attached. I was not aware that there was a
> > difference with these between the 3.0 and 3.2L
> > engines.  Unfortunately, I only have the gears
> from
> > my
> > 3.0L as I basically only bought a 3.2 block with
> > nothing attached.  If anybody has an extra 3.2
> crank
> > timing gear laying around with an undamaged sensor
> > ring they'd sell me, I could really use it. 
> Please
> > let me know.
> > 
> > Thanks!
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> 



		
__________________________________ 
Yahoo! Music Unlimited 
Access over 1 million songs. Try it free.
http://music.yahoo.com/unlimited/