[Shotimes] Turn signal acting up

[Paul Nimz]

If they flash the flasher is working.  The MFS can be cleaned or replaced.  To
clean throw in a bucket of WD 40 and let soak or just spray a whole can on it
over a hour or so.  Blow out and vigorously work all the functions.  Take off
the end cap and clean out the hard grease.  Replace parts and grease end cap
with Vaseline.  Let sit over night and install.

Paul


On 10/17/2005 2:20:58 PM, Ian Fisher (dataflash@yahoo.com) wrote:
> This is normal (unison light flashing and not unison)
>
> I might have missed it but you should try replacing
> the multifunction stalk. If that
> doesn't work, replace
> the flasher in the dashboard.
>
>
> Ian
>
> > >
> > > On a related note, I just noticed for the first
> > time that when the
> > > headlights are off and the turn signal is on, the
> > two front lights on that
> > > side flash in unison, but when the headlights are
> > on, the lights flash
> > > alternately.  I thought that was odd.
> > >
> > > Frank Whittle
> > > '95
> ATX
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> >
>
>
>
>
>
> __________________________________
> Yahoo! Mail - PC Magazine Editors' Choice 200