[Shotimes] Lean stumble before sencondary kick in

[Paul Nimz]

MCM electronics has a 105 bit tool set for about $30.  Has every odd screw tip
included plus a ratcheting handle.

http://mcm.newark.com/NewarkWebCommerce/mcm/en_US/endecaSearch/partDetail.jsp
;jsessionid=SEXMOJPIPUSKMCXFEOFCFGAK2URYWIV1?SKU=22-3495&N=0

or

http://tinyurl.com/axzrq

Paul


On 10/31/2005 12:59:17 PM, Hartberger, Jason M.  AT2 (AW)
(hartbejm@cvn71.navy.mil) wrote:
> Snap-on sells those tamper-resistant torx bits.
> I'm gonna get a couple
> before I pull back into Norfolk.
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net] On Behalf Of Leigh Smith
> Sent: Sunday, October 30, 2005 5:16 PM
> To: Alan Fanning; SHOtimes
> Subject: Re: [Shotimes] Lean stumble before sencondary kick in
>
> No. I think the tech cleaned the MAF wire with carb cleaner, or
> something
> like that. I know he had to remove the MAF module with a tamper
> resistant
> torx bit that I didn't
> have.
> Lee
> ----- Original Message -----
> From: "Alan Fanning" <Awfanning@earthlink.net>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: Sunday, October 30, 2005 3:21 PM
> Subject: Re: [Shotimes] Lean stumble before sencondary kick in
>
>
> > Did you use the dishwasher or what?  ;-)
> >
> >     Alan
> >
> > wrote:
> >
> > > Subject: [Shotimes] Lean stumble before sencondary kick in
> > >
> > > Just cleaned my MAF yesterday on advice from a very good tech. What
> a
> > > difference!
> > > I was getting random part throttle lea