[Shotimes] Removal of Console on '95 ATX
Zach Leahy
leahyz@gmail.com
Mon, 24 Apr 2006 09:22:53 -0400
And after the fifteenth time I threw the screws away, now mine is just
snapped in place. the srews are very overrated. I hid my DataQ ADC
under the console of the racecar.
Z
On 4/22/06, Mike Wojton <mwojton@gmail.com> wrote:
> I'm going to asume that the ATX console and the MTX console are the same.
> Just pull up on it. It's just snapped in down around the parts by the seat
> and your legs. The first time I took mine out I was afraid I was going to
> break something. After the first time it's easy. ; )
>
>
> --
> Mike Wojton
> Dover, PA
>
> -'95 White MTX
> '96 Brake Upgrade
> Eibachs (front)
> Dynomax catback
>
> "Avoid the clap." - Jimmy Dugan
>
>
>
> On 4/22/06, Alan Fanning <Awfanning@earthlink.net> wrote:
> >
> > I need to remove the console on my '95 ATX. I removed two Torx screws in
> > the
> > rearmost compartment and another under the cupholder, but am a little
> > stymied as to how to proceed from here. It's clearly attached up front to
> > something.
> >
> > Also, how do I remove the ATX shift lever? IIRC, there is one or more
> > wires
> > in there that I need to be careful of.
> >
> > Thx.
> >
> > Alan
> > _______________________________________________
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
>
--
Zach Leahy
Fort Wayne, IN
1985 BMW K100RT - For Sale!!
1992 SHO MTX - Arrest Me Red
1993 SHO MTX - Green Racecar