[Shotimes] Rotor rusted to hub

[Dave Kegel]

Use a bigger hammer, like a 5lb sledge.  It'll come off.  WAY easier than
replacing the entire hub/knuckle.

Dave

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Chris Riedl
Sent: Sunday, January 22, 2006 4:55 PM
To: Shotimes@autox.team.net
Subject: [Shotimes] Rotor rusted to hub


    I've about had it with this '91... it has more bizarre problems than any

other Taurus/Sable (3 SHO, 2 other) that I have worked on and gotten to 
know.  This time it's a rotor that appears to be rusted to the hub.  I've 
already tried hitting the back of it with a hammer, but it just stays put 
(even after putting some PB on it).  Any other suggestions would be 
appreciated.  For that matter, how much work would be involved replacing the

whole knuckle?  I don't want to do it, but if that's the only way to solve 
the problem.  I'm afraid the wheel bearing may be going anyway as it seems 
to have some play, but the halfshaft is also out (it failed too, a few 
months after the other side gave up).  I have no experience with the hub, 
and I've heard that the ABS sensors can be a real pain to get out without 
destroying them.


-Chris 
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes