[Shotimes] Tool to Remove Heads

[Bob]

Thanks, $4.95 later, they were off!

	-- Bob

> -----Original Message-----
> From: shotimes-admin@autox.team.net 
> [mailto:shotimes-admin@autox.team.net] On Behalf Of 
> krazgeo@comcast.net
> Sent: Saturday, May 27, 2006 3:41 PM
> To: shotimes@autox.team.net; SHOTimes
> Subject: Re: [Shotimes] Tool to Remove Heads
> 
>  -------------- Original message ----------------------
> From: "Bob" <bob@hotpursuit.net>
> > I was trying to remove the heads with a 10mm allen head 
> socket, but I can't 
> > remove  three of the bolts because the socket interferes
> > with the intake camshaft.  What tool should I be using?
> 
> You don't use a socket.  You use a 10 mm hex key, with the 90 
> degree curve cut off, and use a 10 mm socket on the other end 
> of the cut-off key.  That way, you don't have to take the cams off.
> 
> Mr. Zach Leahy, one of the two co-experts on SHO engines 
> (there are more, I'm just kidding Zach and Mark) showed me 
> that secret back in early 2001 when he came out here and 
> reincarnated a bunch of SHOs for me in one week.
> 
> George
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes