[Shotimes] Overheating ATXs

[Paul Nimz]

My experience at least with the GEN 3 ATX is the factory steel cooler lines
are too restrictive.  Put new 1/4" mNPT x 3/8" hose barbs drilled out to 7/16"
in the tranny, then use 3/8" tranny hose to the cooler.

Paul


On 6/6/2006 5:37:44 AM, Bill Strobel (theamcguy@yahoo.com) wrote:
> One thing I am surprised that more guys do not do at the track events is
> take a clue from the drag racers.  They use those hand pump bug sprayers
> and fill them with water then spray/mist down the radiator between rounds.
> You guys can do the same keep the car running and spray down the rad or
> tranny coolers to provide additional cooling between sets.
>
> Bill Strobel
> Independent Towing
> Fayetteville NC
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes