[Shotimes] RE: Dynomax Cat-back fitment issue UPDATE!! Need more input!

[Ron Porter]

Without looking at your pics, the Dynomax dos not fit anywhere near as well
as the stock setup. IMHO, mostly due to mandrel bends, partly due to
manufacturing tolerances. You have to bend/wrestle/swear at them for a
decent ft, but they will never look as good as a stock setup.

 

FWIW, when my Dynomax pipes died, I went with the stock catback pipe with
the Dynomax mufflers. I felt no power difference, and the fit was FAR
better.

 

Ron Porter

  _____  

From: J. B. [mailto:silver1995mtxsho@sbcglobal.net] 
Sent: Tuesday, June 13, 2006 4:58 PM
To: TechSHO@topica.com; shotimes@autox.team.net
Subject: RE: Dynomax Cat-back fitment issue UPDATE!! Need more input!

 

I am STILL having trouble with the fitment of my Dynomax exhaust, the
drivers side muffler is WAY low and there seems no way to arrange it so it
will sit any higher.

 

I am suspecting that I received a bad rear Y-pipe; that the pipe for that
side is at the wrong angle.

http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhaust00
5.jpg

 

Should this pipe be higher?

http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhaust00
6.jpg

 

This seems too high, no?

http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhaust00
7.jpg

 

Not acceptable....

http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhaust00
8.jpg

 

I would like your thoughts and opinions on this.

 

  _____  

From: J. B. [mailto:silver1995mtxsho@sbcglobal.net] 
Sent: Monday, June 12, 2006 11:18 PM
To: TechSHO@topica.com
Subject: Dynomax Cat-back fitment issue

 

Does anyone have any tips/suggestions on how to get the drivers side muffler
to sit higher?

I have it mocked up, but not clamped anywhere yet.

The strap around the muffler with the hanger is tight, but seems to let it
hang about 1.5-2 inches low.

 

TIA

James B.

--^^---------------------------------------------------------------
This email was sent to: silver1995mtxsho@sbcglobal.net
 
EASY UNSUBSCRIBE click here: http://topica.com/u/?b1dhxA.bOfUDW.c2lsdmVy
Or send an email to: TechSHO-unsubscribe@topica.com
 
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^^---------------------------------------------------------------
--^^---------------------------------------------------------------
This email was sent to: ronporter@ameritech.net
 
EASY UNSUBSCRIBE click here: http://topica.com/u/?b1dhxA.b7QApS.cm9ucG9y
Or send an email to: TechSHO-unsubscribe@topica.com
 
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^^---------------------------------------------------------------