[Shotimes] Installing SS brake lines on a 95 MTX

[Ian Fisher]

Contact Todd Cook and get the proper adaptors. One of
the lines will fit the hardline without an adaptor
(not optimal) while one will not fit at all. I have a
kit from someone else on the list (long story) and
whoever removed the parts failed to send me the
hardline adaptors as well. Contact Todd becuase those
things are critical.

Ian

--- krazgeo@comcast.net wrote:

>  -------------- Original message
> ----------------------
> Make sure you install
> > them exactly how they are labeled as there are 3
> > different hardline fittings on this car.
> pposed to grind out the inside of the bracket to
> > > make the hole bigger (and round)?
> 
> When I switched to Wilwoods back in 2000, I had a
> hard time getting the lines to go on the car...they
> had come off another one, and it didn't make
> sense...what was the problem?.  No one told me one
> side was different than the other.  Make sure you
> try the lines on all 4 corners before you start
> trying to cut and file fittings.
> 
> George
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com