[Shotimes] ATX filter part number

[James White]

There are several filters that fit.

The OEM (maybe FLA-400) which is the small one that is used for most 
Tauri aplications.  I use FLA-1A for my MTX, but I think that there 
is a shorter version of this that would be better than the #400.

Go to what ever chain and just look at the filters that fit Fords.
The threaded part is almost always the same.  Then look at the 
seal.  Excluding the seal, there are only 2 sixes.  I am thinking 
that there is a fatter, but not longer alternative to the ..400 OEM 
number that will fit and do a better job.

regards, Jim White - greensho@crown.net


At Thursday, 16 March 2006, "Al & Angela" <aa4jc1@netzero.com> wrote:

>Hello,
>
>Just curious to know if this is the correct 2nd Gen ATX oil filter
>FT-128, F5DZ-7A098-AA
>
>Also,
>
>Does anyone use non-Ford ATX filters?
>
>Thanks for your time
>
>PS: I know ppl don't like repeat ?s but I did go the archive but 
I didn't
>see a 
>method to search the archive.
>HYPERLINK "http://www.team.net/pipermail/shotimes/"
>\nhttp://www.team.net/pipermail/shotimes/
>
>-- 
>No virus found in this outgoing message.
>Checked by AVG Free Edition.
>Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/2006
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes