[Shotimes] Crankshaft and Cam position sensors
Rich Bruso
shoguy_89@cox.net
Wed, 3 May 2006 14:59:36 +0000
If you haven't done it before, 'properly' means to make sure the timing pulley is ALL THE WAY back before putting the front cover on. Then check it again before sliding the crank pulley on. And then torque to spec.
--
-Rich Bruso
89 Black (Lola)
89 Silver (parts)
Sierra Vista, AZ
---- bjshov8 <bjshov8@comcast.net> wrote:
> Yes sir, forgive my fried brain. And furthermore, in George's honor I
> shall add this: if a person undertakes the crank sensor then above all
> make darned sure that the harmonic balancer bolt is properly torq'd
> upon reassembly.