[Spridgets] Engine removal list suggestions..

Phil Nase bugi1960 at gmail.com
Fri May 23 16:36:19 MDT 2008


My wife lined up the yoke with a screwdriver for me and it actually  
did work very well.

Two person job though that way.

Phil Nase


On May 23, 2008, at 12:46 PM, David Lieb wrote:

>> I would have no problem deferring to the expertise here on the  
>> list, the
>> reason I mentioned this was that I was reading through the shop  
>> manual to
>> become familiar with the project prior to diving in (which prompted  
>> me to
>> start the checklist in the first place), and it says to "Mark the  
>> flange"
>> in section G.2  http://www.smarc.net/MG/techinfo/midget/Section-G.pdf
>>
>> IMHO, can't hurt... I don't have any paint markers, but I find that a
>> bottle of White-Out works good. Also good for making timing marks  
>> easily
>> visable.
>
> True, it won't hurt and it will make it faster finding which set of  
> holes
> line up.
> Bear in mind that this same reference wants you to was the parts in  
> petrol
> and to use a screwdriver to get the snout back into the  
> transmission, so
> take
> it with a grain or two of salt.
> David Lieb
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as bugi1960 at gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list