[Spridgets] Water pump

[WeslakeMonza1330 at aol.com]

If you can't fit a bigger water pump pulley can you fit a smaller  crank 
pulley?  If you use the 2 part Cooper S damper you wouldn't  compromise damping.  
Or if you are using the tin crank pulley you could get  a solid aluminum one 
and turn down the section the belt runs in.
 
Weslake-Monza 1330
 
In a message dated 20/01/2009 01:06:36 GMT Standard Time,  
twobees at sprynet.com writes:

so  really need a larger pulley
for the pump.  However, there isn't enough  room for the fan belt to clear
the thermostat housing if I do that. I have  already ground away a good bit
of the housing for the belt to clear it, and  still treat the outer surface
of the belt and the housing with paraffin wax  in case the belt wobbles
around at speed. I have a head from a 1275 on the  948.