[Spridgets] Crankshaf tpulley bolt

[Larry Daniels]

----- Original Message ----- 
From: "brian S" <bugeye15 at hotmail.com>
To: "spridgets list" <spridgets at autox.team.net>
Sent: Tuesday, June 16, 2009 8:56 AM
Subject: Re: [Spridgets] Crankshaf tpulley bolt


Leo,

I did mine in Frank's driveway a month ago.
As larry said, if you take the pan off,
put a 2x4  between the block and crank.
Or as I did, use a breaker bar, put it against
the frame, and bump the starter to break it loose.

Brian S.
Bugeyeracer finally resto'ed!


==================

To avoid an incredible amount of embarrassment, double check that the 
ignition is off before bumping that starter!!