[Spridgets] value of rebuildable ribcase
Marc
smarc at smarc.net
Wed Mar 18 20:21:25 MST 2009
Uh... thats a frightening thought.... Here's where I convince myself
thats not the problem since I properly torqued the flywheel bolts and
used loctite on them...
I'm pretty sure it's either the throwout bearing or something goofy
with the pressure plate. I first thought the engine was pinging
terribly, until I drove past a wall that reflected the sound back to me
so I could hear it coming from underneath. Which is also when I noticed
the slightest pressure on the clutch pedal would make it stop rattling.
I'm going to see if I can find a few minutes this week to put it on the
lift and see if I can see anything though the fork opening... Dont have
time to yank the motor for probably a couple weeks yet..
Frank wrote:
> Marc wrote:
>> New pilot bearing (not bushing) was installed.
>>>> It rattles horrendously from the
>>>> transmission while driving or idling.
> Loose flywheel bolts will make one hell of a racket when it's running.
--
Marc
More information about the Spridgets
mailing list