[Spridgets] bearing noise

[Guy R Day]

Could it be the clip has now come loose, releasing the endcap and is letting 
the joint wobble?

I note the photo shows 3 of one type of clip and one with 'open' jaws.

Guy R Day


----- Original Message ----- 
From: "Michael Rowe" <mdrowe at optonline.net>
To: "Kevin Valentine" <kevinv1275 at gmail.com>
Cc: "Spridgets" <spridgets at autox.team.net>
Sent: Friday, September 17, 2010 2:58 PM
Subject: Re: [Spridgets] bearing noise


>> There are some that have the nipple in one of the end caps.
>>http://tinyurl.com/23jnboc
>
> That is what I have.  The ears on the clip that goes on the nipple end 
> covered the hole and had to be ground shorter.  Someone picked that clip 
> out of a catalogue and didn't bother to test it.
>
> Michael Rowe _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/spridgets/grday@btinternet.com