[Spridgets] Quarter Elliptical Springs

[Wilson, Doug]

Some years ago I raced a sprite and have two solutions for your springs and
have attached pictures, but not certain it will appear on forum. One solution
is pretty easy and the other was a real pain but effective. The easy solution
is an unused set of rally springs with the serial number and catalog tag still
attached. The second solution is a race set  up. It includes a spring with a
straight main spring (no arch) and leafs of various thickness and arch. I had
Landrum Springs make these for me. The leafs are .260 and .290. With the
various leafs  we could actually "corner weight" the car without messing up
the front ride height too much. When you reduce the leafs you may need spacers
for the U bolt to tighten up. The spacers are included. The spacers can go
above or below the spring depending upon whether you want to raise or lower
the corner. I'll sale either set for $100 plus shipping from Atlanta.
dwilson at eatechnical.com

Doug Wilson

[demime 1.01d removed an attachment of type image/jpeg which had a name of Quater Elliptical Springs New.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of Sprint Tag.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of Race Springs Adjustable Used.jpg]