[Spridgets] Cam removal on 1275 in car
frog.aye
frog.aye at gmail.com
Fri Aug 1 21:36:20 MDT 2014
Vizard used strong magnets on some kind of rods to lift the followers clear of the cam. B He held them clear with clothes pins. B There is a picture in his book somewhere in the discussion of cams. B Although the engine was on a dyno,there's no reason you can't use the same approach in the car.
Hal
Sent via the Samsung Galaxy SB. 5 ACTIVEb", an AT&T 4G LTE smartphone
-------- Original message --------
From: corvallis at peoplepc.com
Date:08/01/2014 6:08 PM (GMT-08:00)
To: spridgets at autox.team.net
Cc:
Subject: Re: [Spridgets] Cam removal on 1275 in car
http://www.theminiforum.co.uk/forums/topic/192399-removing-camshaft-with-eng
ine-in-situ-1275/
I googled...
remove 1275 camshaft engine in the car?
There may be more answere further down the list. Bill in Oregon
==========================================================================
-----Original Message-----
From: Spridgets [mailto:spridgets-bounces at autox.team.net] On Behalf Of
Lester
Sent: Friday, August 01, 2014 6:01 PM
To: Spridgets list; bugeye at yahoogroups.com
Subject: [Spridgets] Cam removal on 1275 in car
Hello all,
is it possible to remove the camshaft on a 1275 with the engine in the car?
Is it remove the head and pull the followers out the top or does the engine
have to come out?
Lester
.. don't ask.
------------------------
------------------------
spridgets at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/frog.aye@gmail.com
More information about the Spridgets
mailing list