[Spridgets] Generator to alternator

[Hal Faulkner]

Craig,
It's all here, from Frank.
Hal

http://pdljmpr.tripod.com/techin.htm#Electrical:

On Sat, Jul 14, 2018 at 8:24 AM, Craig Reese via Spridgets <
spridgets at autox.team.net> wrote:

> So the generator in my Bugeye bit the dust. I have a good alternator out
> of late model Midget that I want to put into the Bugeye, while changing it
> over to negative ground. The alternator has 3 spade connections on it.
> Looking at wiring diagrams I see that the small pin goes to the ignition
> light, while the two large pins wiring eventually end up at the battery. My
> question is, since in my Bugeye there is only the one wire for the ignition
> light and one that goes to battery after the regulator, once I take the
> regulator out of the equation, should I connect both large pins on the
> alternator to the battery, one or the other pin, or does it even matter
> which one?
>
> Craig
> 60 Bugeye
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/spridgets/frog.aye at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20180714/6b2d63fa/attachment.html>