[Spridgets] Generator to alternator

[Craig Reese]

Thanks for the info. As far as I can tell it really doesn’t matter which large spade connector on the alternator I hook the large brown wire to. 

Craig

> On Jul 14, 2018, at 9:27 PM, Hal Faulkner <frog.aye at gmail.com> wrote:
> 
> Craig,
> It's all here, from Frank.
> Hal
> 
> http://pdljmpr.tripod.com/techin.htm#Electrical:
> 
>> On Sat, Jul 14, 2018 at 8:24 AM, Craig Reese via Spridgets <spridgets at autox.team.net> wrote:
>> So the generator in my Bugeye bit the dust. I have a good alternator out of late model Midget that I want to put into the Bugeye, while changing it over to negative ground. The alternator has 3 spade connections on it. Looking at wiring diagrams I see that the small pin goes to the ignition light, while the two large pins wiring eventually end up at the battery. My question is, since in my Bugeye there is only the one wire for the ignition light and one that goes to battery after the regulator, once I take the regulator out of the equation, should I connect both large pins on the alternator to the battery, one or the other pin, or does it even matter which one?
>> 
>> Craig
>> 60 Bugeye
>> ------------------------
>> 
>> spridgets at autox.team.net
>> 
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation: $12.75
>> 
>> Archive: http://www.team.net/pipermail/spridgets
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/frog.aye@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20180715/81d5b231/attachment.html>