[Tigers] Flowmaster Help

Theo Smit tsmit at shaw.ca
Mon Aug 20 21:22:26 MDT 2007


Hi Lewis,
You'd better really like the sound of your Tiger, as well as sharing 
that sound, because if Flowmaster says "it's the most aggressive, 
deepest sounding" muffler they have, it's going to be LOUD. I used their 
50 series Delta flow mufflers, 2" center-in, center-out (their part# 
942050) and I like the sound. They just fit between the stock front 
exhaust hangers (just behind the rear part of the X under the car) and 
the rear axle tube - the rear muffler flange is under the axle.

You can also use side-out outlets, but I think that if you use anything 
but center in then you'll probably end up hitting either the springs or 
the driveshaft. The tubing diameter should match what you're using on 
the rest of the exhaust. There is a big loudness difference between 
2.25" and 2.5" so again you want to be careful about what you go with 
there.

Good luck,
Theo

lewis gooch wrote:
> I AM LOOKING TO BUY A SET OF THE NEW FLOWMASTER SUPER 44'S WHILE THEY ARE ON
> SALE BUT AM UNSURE WHICH IS THE BEST CONFIGURATION FOR THE TIGER. COULD I GET
> SOME FEEDBACK WHICH MIGHT FIT THE BEST OF THESE SHOWN.
> BY THE WAY THEY ARE GIVING AWAY A PAIR A DAY IF YOU GO ONLINE AND REGISTER.
> thanks


More information about the Tigers mailing list