[Tigers] Distributor and Other Advice Needed

Steve Sage fastsage at cox.net
Sat Jan 31 19:37:54 MST 2009


Hello Mike:
Since I'm probably sitting at around 15 degrees at idle I may change to 
the blue stop cam which would give me another 20 degrees = 35 which is 
at the top as you mention. With the black stop now it gives another 15 + 
so I'm probably sitting at not much over 30 maximum now. That would 
explain the power curve dropping off too early like I feel it does now.

I haven't tried to check out the bog without the air cleaner. Excellent 
suggestion.  I'll do that tomorrow and see if it's better. I'm usually 
using the triangle after market air cleaner as I do notice more throttle 
response with that compared to the stock AC air cleaner.

Steve Sage


Mike Michels wrote:
> Steve, I have found that the blue stop bushing and the combination of 
> one light silver spring and one heavy silver spring seems to 
> approximate the stock distributor curve..........................
>
> General consensus is that total advance at high rpm is more important 
> than idle and that you shouldn't go more than 36 degrees. ................
. I have  experienced a bog something like you describe but I think you 
are on the right track regarding carburation or other induction issues. 
I found that the completely stock aircleaner (1-1/2 inch filter element) 
with a deep breathing 4-barrel 289 doesn't flow enough. Does it happen 
without the air cleaner? ..........
>
> --





E-mail message checked by Spyware Doctor (6.0.0.386)
Database version: 5.11660
http://www.pctools.com/en/spyware-doctor-antivirus/


More information about the Tigers mailing list