[Tigers] Hood and scoops

[Ron Fraser]

Mark
	My stock set up is centered to within a 1/16".
3/4" seems extreme to me.
Measure again to verify then start checking your components for center.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of CoolVT at aol.com
Sent: Monday, November 02, 2009 3:41 PM
To: tigers at autox.team.net
Subject: [Tigers] Hood and scoops


On the subject of hoods....I was measuring to possibly  put a scoop on an
old Alpine hood and I noticed that the center of my air  cleaner seems to be

about 3/4" closer to the hood edge opening on the driver's  side than on the

passenger side.
Are all cars like this?  I have an Edelbrock  intake and carb.  Is it my
replacement parts that cause this or is it the  same on the stock set-up?
Mark L _______________________________________________
Support Team.Net  http://www.team.net/donate.html

You are subscribed as rfraser at bluefrog.com

Tigers at autox.team.net http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.423 / Virus Database: 270.14.40/2471 - Release Date: 11/02/09
07:51:00