[Tigers] Turn Signal Flasher Socket

[James Lindner]

Hi

I had  a similar problem last spring but it was with the brake lamp on the 
right side. I changed sockets, the entire rear lamp assembly all to no 
avail. Convinced it was a ground issue I added a separate ground from the 
wing nut to the body...this also failed to correct the problem. Finally I 
made myself a ground wire with a ring connector on one end and a 30 amp clip 
on the other. I clipped the one end to the socket body and secured the ring 
connector under the wing nut. Sure enough...that corrected the problem and 
both lamps now work fine.

Hope it helps.

Jim
----- Original Message ----- 
From: <larryall at pacbell.net>
To: <tigers at autox.team.net>
Sent: Tuesday, March 13, 2012 6:20 PM
Subject: [Tigers] Turn Signal Flasher Socket


>I am having some trouble with my turn signals on right side and I have 
>tried
> to looking at the wiring to the flasher socker under dash.  It is 
> difficult to
> see from upside down.  Is it possible for me to remove the 4 screws in the
> front of dash to tilt it slightly at the top so that I can peer down at 
> the
> socker?
> Thanks in advance
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/jliny5@cox.net