[Tigers] Boss 302 carb spacer with PCV port

[Michael Wood]

Thanks'

I found a vendor that lists a repro Boss spacer and ordered last night. Now, to see if they confirm...

Sent from AOL Mobile Mail


-----Original Message-----
From: Ron Fraser <rfraser at bluefrog.com>
To: 'Michael Wood' <mwood24020 at aol.com>; tigers <tigers at Autox.Team.Net>
Sent: Mon, Aug 29, 2016 08:33 AM
Subject: RE: [Tigers] Boss 302 carb spacer with PCV port



Mike                I did a Google search for thin carb spacer w/ PCV port.This showed up;Trans Dapt  2094 – 3/8” thick with PCV port No experience with this product but it looks like it is available at Summit, Jegs and others. Hope that helps Ron Fraser From: Tigers [mailto:tigers-bounces at autox.team.net] On Behalf Of Michael Wood via Tigers
Sent: Sunday, August 28, 2016 3:40 PM
To: tigers at autox.team.net
Subject: [Tigers] Boss 302 carb spacer with PCV port Anyone know of a current source for a thin carb spacer with PCV port? I know that the original Boss 302 plate (1/4") was being reproduced, but the old sources like NPD don't seem to have them in stock any longer...
Thanks
Mike