[Tigers] Mk 1A Water Pump

[Tom Parker]

I bought one of Rick's pumps. The fan belt lines up straight with the crank
pulley and the Alternator pulley. I didn't measure the front / back
distance; it lines up straight, so  it's right.

Tom
'67 Mark 2

On Thu, Jul 27, 2017 at 10:16 AM, Ron Fraser via Tigers <
tigers at autox.team.net> wrote:

> Rob
>
>                 It is highly unlikely that those water pumps would have
> the 4.875” dimension; they will all be set to stock Ford water pump
> dimension but you can press the front hub to the correct position.
>
>
>
> I thought Sunbeam Specialties sold water pumps with the correct dimension.
>
>
>
> There are rebuild kits out there for that water pump.
>
>
>
> Ron Fraser
>
>
>
> *From:* Tigers [mailto:tigers-bounces at autox.team.net] *On Behalf Of *Rob
> Hogan via Tigers
> *Sent:* Wednesday, July 26, 2017 11:37 PM
> *To:* Tiger's List <tigers at autox.team.net>
> *Subject:* [Tigers] Mk 1A Water Pump
>
>
>
> My C5AE-8505-C water pump has seized while it was in storage for 34 years
> and it is going to be extremely difficult to find a rebuilder in the SW
> Michigan area.  I have determined that the critical dimension is 4.875"
> from the rear mounting surface to the front hub's face.  Finding a
> replacement pump isn't as easy since this dimension isn't given in sales
> info.  Potential replacements are the Gates 43072 and the FlowKooler 1680.
>
>
>
> Does anyone know if these pumps measure 4.875 from the rear mounting
> surface to the front hub's face?
>
>
>
> Rob Hogan
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/tkparker1941@
> gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20170727/eebbe92b/attachment.html>