[Tigers] Clutch

[Mark Rense]

Do it soon, brake fluid will run down the inside firewall and ruin the
paint. Ask me how I know dat!


On Thu, May 18, 2017 at 12:45 PM awtiger--- via Tigers <
tigers at autox.team.net> wrote:

> Hey, Mark:
>
> Been there, done that.  Yep...the seal in one or both cylinders is
> bypassing fluid.  I'll bet you could squeeze the dust boots of both the
> slave and master and get fluid to drip out of one/both of them.  I've had
> good luck building my cylinders over the years, unless they are badly
> pitted.  Usually, though, a little emory cloth will do the trick.
>
> Good luck,
> Andy Walker
> Edmond, OK (tornado alley today...)
> B382001600LRXFE
>
> ---- CoolVT--- via Tigers <tigers at autox.team.net> wrote:
> > If I hold the clutch in for too long the pedal begins to sink and I lose
> > pedal pressure. If I let the pedal up and repress it, it works fine.
>  There
> > are no external leaks so I'm assuming that the master or the slave is
> > leaking by internally.  Time for a rebuild?  Probably been close to 25
> yrs.
> > since they were rebuilt.
> > Thanks, Mark L
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/mark44124@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20170518/7be37bad/attachment.html>