[Tigers] Carb question

[tom pappenhagen]

My car (mine since 1984-ish) had what looks to be the original 2-barrel on
it with a manual choke and some funky bracketing.  I'm keeping the manual
choke going to a 4-barrel Edlebrock carb, Moss Motors offers an MGB choke
cable which is a close match to that on my car.

Tom
B9473100

On Thu, Oct 18, 2018 at 11:41 PM Joe Brown via Tigers <tigers at autox.team.net>
wrote:

> The original owner of my car had his dealer install a big Holley double
> pumper with a manual choke (back in the '60s). So I have that choke cable
> already and I have decided to go with an Edelbrock carb with a manual
> choke. It looks like it will be the simplest and cheapest way to go.
>
> Thanks for everyone's input.
>
> Thanks,
> Joe Brown
>
> On Thu, Oct 18, 2018, 12:02 PM Mark Rense via Tigers <
> tigers at autox.team.net> wrote:
>
>> Just a point but the original Holley 4bbl on the LAT1 kit was a manual
>> choke carb. My car uses the Alpine choke knob on the dash and a steel
>> sheathed cable. Don't know if there was a "kit" offered to add this or if
>> it was a roll-your-own sort of thing.
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com
>>
>>
>> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/pappentl@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20181019/c6a7fa7b/attachment.html>